Release Agent Spray Gun with Round-Flat Spray Regulation by TONSON Air Motors

SPRAYING SPECIALIST

RELEASE AGENTS SPRAY GUN

FS-1 Series Fine Spray Gun

Essential Release Agents Spray Gun
with Round-Flat Spray Regulation

Specially designed to handle sprayable fluids of very low viscosities.
(ex. Release Agents or oils) in finest droplets with reduced overspray.
Fine coordination of prevision made nozzle, needle and air cap produce an atomizing result which particularly when applying release agents gives an extreme smooth layer on moulds and dies. Worldwide this very handy gun is popular in the field of thermoplastic industries and the foundry industries. Featuring handy short gun body and the duo-feed hose for fluid as well as atomizing air through the grip to allow comfortable handling. In accordance to latest regulations, release agents free of CFC will only be allowed. These agents provide a smooth finish of fine droplets to the surface when applied with this gun.
Different nozzle extensions and HVLP-technique for application of adhesives available.

Specifications
Nozzle Diameter: 0.2, 0.3, 0.5, 0.8, 1.0, 1.2, 1.5 mm
Max. Material Pressure: 4 bar (58 PSI)
Max. Air Pressure:   6 bar (87 PSI)
Air Hose:   PU 4 mm x 6 mm (ID x OD)
Material Hose: PE 4 mm x 6 mm (ID x OD)
Gund Body:    Aluminum
Nozzle and Needle: Stainless Steel
Mass:   240 g (0.53 lb)

Option: Standard

Specifications may be customized.
Pictures are for illustration only. Subject to change without notice.

Order Code
FS-1R-## ##: Nozzle Option: (02 = 0.2 mm, 03 = 0.3 mm, 05 = 0.5 mm...)

Example: FS-1R-05 (0.5 mm nozzle Release Agent Spray Gun with Round-Flat Spray Regulation )

TONSON Air Motors Mfg. Corp.
22 Shu-Yi 1st Lane
Taichung, 40256, TAIWAN
TEL: +886 4 2261 1047
FAX: +886 4 226 11678
www.tonson-motor.com
sales@tonson-motor.com

NeuMek Corporation
289 Long Lian Rd., Qing Pu District
Shanghai, 201702, CHINA
TEL: +86 21 2281 8889
FAX: +86 21 2281 7669
www.neumek.cn
sales@neumek.cn