Mixing Propellers by TONSON Processing, Propeller manufacturer
Last revision Date: June, 14th, 2012
Propeller / Impeller
TONSON® Propellers | Impellers | Dispersers
tank propeller
fluid propeller
Variety of mixing, blending, dispersing propellers are available in plastic, aluminum and stainless steel
(304, 316, 316L) depending on different styles of propellers.

Custom shafts and impellers are available in stainless steel (304, 316, 316L) and teflon Coating.

Contact and send us sketch of custom propellers you want to make.

Impeller Selection
   *Understanding of process requirements
   *Knowledge of physical properties (refer to Material Safety Data Sheet)

How to order (see ordering code)

SS: Stainless Steel


TURBINES (for low to medium viscosity fluids)

Axial Flow Square Pitch (Marine) Propeller
All purpose propellers used for mixing, blending, agitating, liquid movement of all kinds. Both left hand (most common) and right hand propellers available.
Square Pitch Propeller
Square Pitch Propeller_marine propeller
4”, 5”, 6”, 8”, 10” shown
Style
 A1
Propeller DIA. (inch)
 3 ~ 16
Bore (mm | inch)
 12~50 | 3/8”~1-1/4”
Material
 SS
Axial Flow Impellers
For blending, solids suspension, solids incorporation or draw down, gas inducement, and heat transfer. Custome axial flow impellers may be designed with a different pitch to change the combination of pumping rate and thrust.
Propeller
propeller a2
impellera 3right
Propeller A4
Style
A2
A3
A4
Propeller DIA. (inch)
Ø10"
Ø8" right handed
Ø8" left handed
Bore (mm)
Ø16~25
Ø16~25
Ø16~25
Material
aluminum, SS
aluminum, SS
aluminum, SS

Propeller
mixer impeller A5
propeller A8
mixer propeller a9
Style
A5
A8
A9
Propeller DIA. (inch)
Ø14"
Ø6"
Ø6"
Bore (mm)
Ø12~16
Ø12
Ø12
Material
aluminum
aluminum
SS
Nike Free 3.0 V2 Schuhe Schweiz Nike Roshe Fragment Design 3 Schuhe Schweiz Nike Free Powerlines Schuhe Schweiz Nike Air Max 2020 Schuhe Schweiz Nike Dunk CMFT PRM Schuhe Schweiz

Propeller
propeller d3
propeller d4
propeller D6
Style
D3
D4
D6
Propeller DIA. (inch)
Ø12"
Ø8"~Ø12"
Ø12"
Bore (mm)
Ø16~25
Ø12~25
Ø16~25
Material
aluminum, SS
SS
aluminum, SS

Click for Ordering Code

Propeller
impropeller B4　
Propeller B5
propeller B6　
impeller B9
Style
B4
B5
B6
B9
Propeller DIA. (inch)
Ø5"
Ø4"
Ø23/4"
Ø6"~12"
Bore (mm)
Ø12~16
Ø12~16
Ø7
Ø12
Material
aluminum, SS
aluminum, SS
SS
SS

Several propellers may be mounted on a single shaft for mixing heavy viscous materials. Available in both left and right hand rotation.
Two Bladed Propellers
Two Bladed Propellers E1　
Two Bladed Propellers E2
two bladed propeller E3
two bladed propeller E4
Style
E1
E2
E3
E4
Propeller DIA. (inch)
Ø10"~18"
Ø10"
Ø6"~7"
Ø12"~16"
Bore (mm)
Ø20
Ø16
Ø16
Ø12~25
Material
aluminum
aluminum
aluminum
aluminum, SS

Two Bladed Propellers
two bladed propeller E6
two bladed propeller E7
Style
E6
E7
Propeller DIA. (inch)
Ø6"~12"
Ø6"~12"
Bore (mm)
Ø12~25
Ø12~25
Material
SS
SS

Click for Ordering Code

Pitched blade turbine
pitched blade turbine propeller a7
pitched blade turbine propeller at5
pitched blade turbine propeller E5
Style
A7
AT5
E5
Propeller DIA. (inch)
Ø6"
Ø6"~12"
Ø10"~14"
Bore (mm)
Ø12~16
Ø12~25
Ø20~30
Material
aluminum,SS
SS
SS

High Viscosity
high viscosity propeller
Say "No" to dual-shaft mixers in many applications
Model
A6
Propeller dia.
Ø6"~12"
Bore (mm)
Ø12~25　
Material
SS

Closed to enter drum or bulk tank, opens up with mixing rotation. For thin materials, use one impeller; for thicker materials use two or three. Set screws included. Shafts are sold separately.
Collapsible
propellerimpeller
 collapsible propeller C5 collapsible propeller C5 1
4" 6" 12"
Style
C5
Propeller DIA. (inch)
Ø6"~14"
Bore (mm)
Ø12~25
Material
SS

Folding propellers for fast and thorough mixing. Allowing entering and extraction through small openings.
Closed to enter drum or bulk tank, opens up with mixing rotation. For thin materials, use one impeller;
for thicker materials use two or three. Set screws included. Shafts are sold separately.

Collapsible / Folding
folding mixerfolding impeller
 folding impellerfolding propeller folding propellerfolding mixer
6" 8" 10"
Style
C5S
Propeller DIA. (inch)
Ø6"~12"
Bore (mm)
Ø12~25
Material
SS


Click for Ordering Code

Mixed Flow Impeller
Create circular, axial and radial turbulence force solids off the bottom with minimum swirl and vortex.
Mixed Flow Impeller
mixed flow impeller propeller MF1
mixed flow impeller E2
mixed flowim peller propeller R1
Style
MF1
E2
R1
Propeller DIA. (inch)
Ø6"~10"
Ø10"
Ø11"
Bore (mm)
Ø12~25
Ø16
Ø16
Material
SS
aluminum
SS

RADIAL FLOW IMPELLER
Open Flat Blade
For low to medium viscosity fluids; most effective for gas-liquid and liquid-liquid dispersion and higher shear and turbulence levels with lower pumping. Providing strong top-to-bottom flows both above and below the impeller when used with suitable baffles.
Open Flat Blade
open flat blade f1　
Style
F1　
Propeller DIA. (inch)
Ø6"~10"
Bore (mm)
Ø12~25
Material
SS

Prevents gas from rising along the mixer shaft. Suitable for use with a pitched blade turbine for use in gas-liquid mixing.
Rushton /
Disk Style
rushton propeller C6　
Style
C6
Propeller DIA. (inch)
Ø2"~25"
Bore (mm)
Ø10~36
Material
SS

Click for Ordering Code
Hydrofoil Impellers
For application where axial flow is important and low shear is desired. Efficient for liquid blending and solid suspension.
Turbo propellers provide low resistance.

Hydrofoil
 hydrofoil propeller Hydrofoil impeller hydrofoil propeller Hydrofoil propeller
6" 14" 50"
6"
 14"
Style
C4
C4-4
Propeller DIA. (inch)
Ø6"~50"
Ø6"~50"
Bore (mm)
Ø16~75
Ø16~75
Material
SS
SS

Hydrofoil
impeller High Shear Hydrofoil Impellers
Rear end saw tooth structure for high shear providing irregular high intensity of turbulence, tearing and crushing solid group like fluid. Maximizing flow per horsepower input, high dispersion; suitable for powder dissolution and dispersion.
Style: C4S
Style
C4S
Propeller DIA. (inch)
Ø6"~50"
Bore (mm)
Ø16~75
Material
SS
High-shear Impellers
Operated at high speeds and for the addition of a second phase (ex. Gas, liquid, solid, powder) in grinding, dispersing pigments, and making emulsions. Providing high intensity of turbulence in the vicinity of the impeller, maximizing flow per horsepower input. Suitable for paint, clay slurries, paper coating...etc.
High-shear
high shear propeller B7　
High shear propeller B8　
Style
B7
B8
Propeller DIA. (inch)
Ø2"~5"
Ø5"~6"
Bore (mm)
Ø8~20
Ø12~20
Material
SS
aluminum

High-shear
High shear C1
High shear C2
high shear propeller C3
high shear propeller D1
Style
C1
C2
C3
D1
Propeller DIA. (inch)
Ø8"
Ø8"
Ø6"~11"
Ø8.5"
Bore (mm)
Ø16~25
Ø16
Ø16~50
Ø16~25
Material
aluminum, SS
aluminum
SS
aluminum, SS

Click for Ordering Code
CLOSE-CLEARANCE IMPELLERS (for high viscosity fluids)
Anchor
Designed to physically turnover the fluids as viscous fluids are difficult to pump and providing gentle macro scale blending of liquids at low shear.
Anchor
anchor propeller
Style
N1　
Propeller DIA. (inch)
　
Bore (mm)
　
Material
SS　

Helical Ribbon
Provides top-to-bottom physical movement of the liquid.
Helical Ribbon
helical ribbon rb1
Style

RB1　
Propeller DIA. (inch)
　
Bore (mm)
　
Material
SS　
Helix
Helix
helix propeller H1　
Style
H1
Propeller DIA. (inch)
　
Bore (mm)
　
Material
SS

Laboratory Impeller
Laboratory
propeller B6
high shear propeller B7
Style
B6
B7
Propeller DIA. (inch)
Ø23/4"
Ø2"
Bore (mm)
Ø7
Ø8
Material
SS
SS

Click for Ordering Code
MIXING TOOLS FOR HANDHELD MIXERS
　
Small batch mixing propeller
small batch mixing propeller d5
Style
D5
Propeller DIA. (inch)
Ø4"
Bore (mm)
Ø12~25
Material
SS
COATING OPTIONS
Teflon
teflon propeller A3 Coating
teflon propeller C4 coating　
Style
A3 (coating)
C4
Propeller DIA. (inch)
Ø8"
Ø6"
Bore (mm)
Ø12~25
Ø12~25
Material
aluminum, SS
aluminum, SS
CUSTOM SAMPLE
Custom
custom propeller sample m1
custom propeller sample m2
custom propeller sample m3
custom propeller sample m4
custom propeller sample m5
Style
Sample 1
Sample 2
Sample 3
Sample 4
Sample 5

Custom
客製葉片M6
custom propeller sample m7
custom propeller sample m8
custom propeller sample m9
Style
Sample 6
Sample 7
Sample 8
Sample 9
Sample 10

Custom
Style
Sample 11
Sample 12
Sample 13
Sample 14
Sample 15

Custom
Style
Sample 16
Sample
Sample
Sample
Sample

Custom
custom propeller sample S1
custom propeller sample S2
custom propeller sample S3
custom propeller sample S4
custom propeller sample S5
Style
Sample S1
Sample S2
Sample S3
Sample S4
Sample S5

Custom
 custom propeller sample S6 custom propeller sample S7 custom propeller sample S8 custom propeller sample S9. custom propeller sample s10
Style
Sample S6
Sample S7
Sample S8
Sample S9
Sample S10

Custom
Custom S11
客製葉片 S12
Style
Sample S11
Sample S12


How to order (see ordering code)

Accessories
Stainless Steel Shafts
Straight Stainless Steel Shafts (SS316 and SS316L); for use with propellers or couplers.
Model
Diameter (mm)
Length (mm)
SS12.7
Ø12.7
 　
SS16
Ø16
customer
SS20
Ø20
specify
SS25
Ø25
 　

Couplers
Available in both carbon steel and stainless steel for use in attaching mixing shafts to motors' or reducers' output shafts. Complete with set screws.
Model
Dimensions
Length 


 
             

  
    
HEADQUARTER
TONSON AIR MOTORS MFG. CORP.
22 Shu-Yi 1st Lane, Taichung 40256, TAIWAN
TEL: +886-4-2261 1047   Mobile: +886-928 989238   FAX: +886-4-2261 1678
 
GPS: 24°07'12.38"  N 120°39'25.68" E

CHINA
NeuMek (Shanghai) Corporation
289 Long Lian Rd., Qing Pu District, Shanghai 201702, CHINA
TEL:+86-21 2281 8889   +86-21 2281 7669  FAX:+86-21-3987 9136
Mobile : +86-13917636393 / 13818-336699
  sales@neumek.com

Guang Dong, CHINA
29 San Heng Rd., Ci Bian Xiao Qu, Hou Sa Rd.
Hou Jie Town, Dong Guan 52300, CHINA
TEL:+86-(0) 769 8122 0478   FAX:+86-(0) 769 8122 0479
Mobile : +86-13560848899

Fu Jian , CHINA
12 Building A, Gao Pu Mao Yi Shang Cheng, Xing Lin East Road,
Ji Mei District, Xia Men City, Fu Jian Province, CHINA
TEL:+86-(0) 592 625 9768   FAX:+86-(0) 592 625 9769
Mobile : +86-13779945836

United States
AIR MOTORS TONSON (USA)

AUSTRALIA
TONSON AUSTRALIA Pty. Ltd.
U3, 4 Weld Street
Liverpool Sydney NSW 2177
TEL: +61 (0)2 9600 8881   FAX: +61 (0)2 9600 8882
 
Copyright ©™ 1966 - 2010 TONSON Air Motors